為冬天做準(zhǔn)備的英文圖解，看上衣服的樣子和板型，但原版的用線是晴綸線，  ?。
GAUGE: *Modern Baby (Article #924). 50% Acrylic,
50% Nylon; package size: 2.60oz/75.00 gr.
(173yds/158m) pull skeins
*Vanna's Glamour (Article #861). 96% Acrylic,
4% Metallic Polyester; package size:
1.75oz/49.61 gr. (202yds/185m) pull skeins
? 20 sts + 38 rows = about 4 in. (10 cm) in Garter st (k every row) with A.When you match the gauge in a pattern, your project will be the size specified in the pattern
and the materials specified in the pattern will be sufficient. The needle or hook size called for
in the pattern is based on what the designer used, but it is not unusual for gauge to vary from
person to person. If it takes you fewer stitches and rows to make your swatch, try using a
smaller size hook or needles; if more stitches and rows, try a larger size hook or needles.
Making a Gauge Swatch?
NOTES:
1. Tunic is worked in 2 pieces: Back and Front.
2. Back and Front are each worked in 5 Panels: Lower Panel, Center Panel, Right Side Panel,
Upper Panel, and Left Side Panel. Construction details are shown on the diagram.
3. The Front has a pocket!
4. Yarn color is changed to make stripes. Do not cut yarn between color changes, simply carry
the unused color along the side edge of your work.
5. A circular needle is used to accommodate the width of the pieces. Work back and forth in
rows on circular needle as if working with straight needles for everything except neck edging.
Work neck edging in rnds.
STRIPE SEQUENCE
Work *2 rows with A, 2 rows with B; rep from * for Stripe
Sequence.
BACK
?
Lower Panel
With longer circular needle and A, cast on 90 (111, 129) sts.
Working back and forth in rows on the circular needle, work
in Garter st (k every row) until piece measures about 9 (9
1/2, 10) in. (23 (24, 25.5) cm) from beg.
Center Panel
Row 1 (RS): With A, bind off 29 (36, 42) sts, join B and
bind off 1 st, with B, k to end of row – 60 (74, 86) sts.
Place marker in first st of this row for beg location of Right
Side Panel.
Row 2: With B, knit.
Change to A.
Work in Garter st, changing color following Stripe Sequence
until Center Panel measures about 6 in. (15 cm); end with a
RS row worked with A as the last row you work.
Next Row (WS): With A, bind off 30 (37, 43) sts, k to end
of row – 30 (37, 43) sts.
Place marker in first st of this row for end location of Left
Side Panel.
Change to B.
Work in Garter st and Stripe Sequence until Center Panel
measures about 12 in. (30.5 cm); end with a WS row
worked with B as the last row you work.
Cut yarns and slip rem sts to a holder.
Right Side Panel
From RS, join A at marker in corner between Lower Panel
and Center Panel; pick up and k60 sts spaced as evenly as
possible across side edge of Center Panel between marker
and st holder.
Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Right Side Panel
measures same as Lower Panel bind-off edge.
Bind off.
Upper Panel
From RS, join A at top right corner of Right Side Panel; pick
up and k30 (37, 43) sts spaced as evenly as possible across
top edge of Right Side Panel; then k30 (37, 43) Center Panel
sts from holder – 60 (74, 86) sts.
Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Upper Panel
measures about 5 3/4 in. (14.5 cm); end with a RS row
worked with B as the last row you work.
Shape Neck
Next Row (WS): With B, bind off 37 (43, 46) sts, k to end
of row – 23 (31, 40) sts.
With A, knit 2 rows.
Bind off.
Left Side Panel
From RS, join A at top left corner of Upper Panel, pick up
and k29 sts spaced as evenly as possible across side edge of
Upper Panel and 30 sts across side edge of Center Panel to
marker on left edge of Panel – 59 sts.
Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Left Side Panel
measures about 1 1/2 (1, 1) in. (4 (2.5, 2.5) cm); end with
a WS row as the last row you work.
Next Row (RS): Cast on 1 st for neck, k to end of row – 60
sts.
Work in Garter st and Stripe Sequence until Left Side Panel
measures same as Center Panel bind-off edge.
Bind off.
Following diagram, sew lower side edge of Right Side Panel
to Lower Panel bind-off edge. Sew lower side edge of Left
Side Panel to Center Panel bind-off edge.?
FRONT
? Work same as Back to Upper Panel.
Upper Panel
From RS, join A at top right corner of Right Side Panel, pick
up and k30 (37, 43) sts spaced as evenly as possible across
top edge of Right Side Panel, then k30 (37, 43) Center Panel
sts from holder – 60 (74, 86) sts.
Next Row (WS): With A, knit.
Change to B.
Work in Garter st and Stripe Sequence until Upper Panel
measures about 5 1/2 in. (14 cm); end with a RS row
worked with A as the last row you work.
Shape Neck
Next Row (WS): With A, bind off 37 (43, 46) sts, k to end
of row – 23 (31, 40) sts.
With B, knit 2 rows.
With A, knit 2 rows.
Bind off.
Left Side Panel From RS, join A at top left corner of Upper Panel, pick up
and k27 sts spaced as evenly as possible across side edge of
Upper Panel and 30 sts across side edge of Center Panel to
marker on left edge of Panel – 57 sts. Next Row (WS): With A, knit.?
Change to B.
Work in Garter st and Stripe Sequence until Left Side Panel
measures about 1 1/2 (1, 1) in. (4 (2.5, 2.5) cm); end with
a WS row as the last row you work.
Next Row (RS): Cast on 3 sts for neck, k to end of row –
60 sts.
Work in Garter st and Stripe Sequence until Left Side Panel
measures same as Center Panel bind-off edge.
Bind off.
Sew lower side edge of Left Side Panel to Center Panel
bind-off edge.
Leave lower side edge of Right Side Panel unsewn – this
makes the pocket!
Pocket
Hold Front upside down, with cast-on edge at top.
From RS, referring to diagram, place a marker on free side
edge of the Right Side Panel, about 1 in. (2.5 cm) from outer
edge of Front.
From RS, join C at beg of marked edge (in inside corner).
Pick up and k25 (32, 38) sts spaced as evenly as possible
across edge to marker.
Next Row (WS): Purl.
Continue in St st (k on RS, p on WS) until pocket measures
about 8 in. (20.5 cm).
Bind off.
Fold pocket in half, with RS tog. Sew bound-off edge of
pocket to WS of bound-off edge of Lower Panel. Seam sides
of pocket. Sew rem 1 in. (2.5 cm) of side edge of Right Side
Panel and top edge of Lower Panel tog.
FINISHING
Sew shoulder seams.
Neck Edging
From RS with shorter circular needle and C, working around neck edge beg at right shoulder seam, pick up
and k2 sts along right back shoulder, 54 (57, 60) sts spaced as evenly as possible across back neck, 2 sts
along left back shoulder to seam, 4 sts along left front shoulder, 54 (57, 60) sts spaced as evenly as
possible across front neck, and 4 sts along right front shoulder – 120 (126, 132) sts.
Note: After working a few rows, you may decide that your band would look better if you had picked up
more or fewer sts than the amount indicated for your size. Since a well-balanced band adds a beautiful
finishing touch to your Tunic, we strongly recommend that if you've any doubts, simply pull out the sts and
adjust the number that you pick up. The pattern instruction reflects the number that the designer picked
up – but everyone's knitting is a bit different.
Place marker for beg of rnd and join by working the first st on the left hand needle with the working yarn
from the right hand needle.
Knit 2 rnds.
Bind off.
Armhole Edging
Place markers on side edges of Front and Back about 7 1/2 (8, 8 1/2) in. (19 (20.5, 21.5) cm) down from
shoulder seams.
From RS with shorter circular needle and C, pick up and k84 (90, 96) sts spaced as evenly as possible
across armhole edge between markers.
Purl 1 row.
Knit 1 row.
Bind off.
Rep for other armhole.
Sew side seams of Front and Back (including ends of armhole edging), leaving lower 6 in. (15 cm) unsewn
for side slits.
Weave in ends.
ABBREVIATIONS / REFERENCES
Click for explanation and illustration
|
|
|
|
|
|
|
|
St st = Stockinette stitch
|
|
|
|
|
?
? |
新跟帖 (共1 條評論)
查看更多評論。。。